中文English
Home > Product > Transmit Equipment > Media Converter
PRODUCTS
Categories
Hot products
10G Media Converter
10Gbps Ethernet media converter between SFP+ to UTP,and XFP to UTP. No matter what kind of media applied for 10Gbps Ethernet,it used to be the fiber as the media for transmission.

  • 10G Fiber Media Converter 


    Features:

    ♦ Supporting 10G full duplex autosensing

    ♦ Supporting auto-MDI/MDIX

    ♦ Supporting 10Gbase-T to 10Gbase-SR/LR/ER/ZR

    ♦ 3R function, stable data transmission

    ♦ Short delay time when transparent transmission

    ♦ Supporting Jumbo frame

    ♦ Supporting transmission length of RJ45 network cable

    ♦ Supporting DMI(Diagnostic Monitoring Interface) function of optical transceivers

    ♦ Supporting 850nm, 1310nm, 1550nm and DWDM/CWDM wavelength ruled by ITUT

    ♦ Supporting Loopback, precisely locating the failure, convenient for link test

    ♦ Economical management function within bandwidth

    ♦ With powerful network management function(Web，SNMP，Console), supporting WEB and SNMP

    ♦ Supporting hot plug

    ♦ Easy installation with complete LED indicators for working situation

    ♦ Supporting 2U chassis (17 slots) and standalone use


     

     Application:

    ♦ 10G transmitting network

     

     Description: 

    10G Fiber media converter , Using Optical - Electrical - Electrical wavelength conversion, realize the optical signal equilibrium amplification, clock extraction and optical regeneration, and with WDM (DWDM/CWDM) technology, can achieve optical signals transmit in a single fiber by single or multiple way over a long distance. On the existing network infrastructure, it can quickly improve the communication capacity, expand the bandwidth, while using low cost and high cost-effective solutions to manage and operate the system, easy operation and maintenance.

     

    Technical Index:

    InterfacePort ASFP+XFP
    Port BRJ45RJ45
    Transmission Speed10G10G
    ProtocolsIEEE802.3an(10Gbase-T);
    IEEE802.3ae(10Gbase-SR/LR/ER/ZR)    		Access Type10G LAN
    Transmission DistanceSFP+ module: Up to 80Km
    10Gbase-T: 100meters Cat .6a cable
    Maximum Packet Forwarding Rate14,880,950/S
    Network management
    information:    		•  Card type information
    •  SFP+ or XFP fiber module detection
    •  SFP+ or XFP fiber module DMI function （ Temperature 、 Voltage 、 Optical power ）
    •  Link status detector
    •  Enable/Disabled Loopback test function
    •  Enable/Disable PRBS Generator and checker function
    •  Rate select （ 10Gbase-Lan or Wan ）
    •  Remote card's status monitor （ only in pairs ）
    Power requirementRack-mountable : AC 85 ～ 220V OR DC -48V
    Standalone: AC 220V OR DC -48V
    Power consumption: ≤9W
    Work EnvironmentOperating Temp: 0~ 50 ℃
    Storage Temp: -10~ 70 ℃
    Humidity: 5%~90% （ non-condensing ）
    DimensionCard ：11.5mm(W)×78mm（D）
    Standalone ：156mm（W）×128mm（D)×32mm（H）


    Ordering Information:

    P/NDescriptionRemark
    GM-10G-SFP+10G Media ConverterSFP+ to RJ45
    GM-10G-XFP10G Media ConverterXFP  to RJ45

Copyright Gezhi Photonics Co.,Ltd. All rights reserved.