1×1, 1×2 High Power Optical Switch

GEZHI Photonics High Power 1×1, 1×2 fiber optical switches connects optical channels by redirecting an incoming optical signal into a selected output fiber. This is achieved using patented non-mechanical configurations and activated via an electrical control signal. Latching operation preserves the selected optical path after the drive signal has been removed.

Specification

1×1, 1×2 High Power fiberoptic Switch

Description

GEZHI Photonics High Power 1×1, 1×2 fiber optical switches connects optical channels by redirecting an incoming optical signal into a selected output fiber. Latching operation preserves the selected optical path after the drive signal has been removed. The all High Power fiberoptic switch features low insertion loss, high extinction ratio, high channel isolation, and extremely high reliability and repeatability. It is designed to meet the most demanding switching requirements of continuous operation without failure, longevity, operation under shock/vibration environment and large temperature variations, and fast response time. The switch also has build-in Circulator and isolator functions. Electronic driver is available for this series of switches.

Protection, Transmitter and Receiver Protection,Network Test System and Instrumentations.

Features

Low Insertion Loss

High Crosstal

Compact package

High Power

Applications

Configurable OADM

Optical Cross & Connection system

Network Monitor

Optical Fiber Ring Protection

Technical Paremeter

Parameter		Value
Type		1×1, 1×2

Wavelength (nm)	1310 +/30 or 1550+/-30		1310+/-30&1550+/-30

Insertion Loss (dB)	≤0.7(Typ 0.6)		≤0.9(Typ 0.7)

Cross Talk (dB)	≥55		≥55

Return Loss (dB)	≥55		≥55

Repeatability (dB)		≤±0.05

Switch Time (ms)		10

Lifetime (cycle)		>1,000,000

Switch mode	Latching or Non-latching

Operating Temperature (°C)		-5 ~ +70

Storage Temperature (°C)		-40 ~ +85

Drive Voltage (V)	5 ±0.5 DC or 5V Pulse

Work Current (mA)		＜50

Power Handing(W)		<10

Fiber Type		SMF-28e

Fiber length (m)	Read order information

Dimension (LxMxH) (mm)	(L)26.5×(W)13.4×(H)11

Pins

Optical Path	Electrical Drive				Status Sensor
	Pin1	Pin10	Pin5	Pin6	Pin2-3	Pin3-4	Pin7-8	Pin8-9
1-2	+V Pulse	GND	N/A	N/A	open	close	close	open

1-3	GND	+V Pulse	N/A	N/A	close	open	open	close

Package Dimension

图片12.png

Ordering Information

Type	Wavelength	Type	Power	Mode	Pigtail Type	Length	Connector
			Handing
HPFSW	1310=1310nm	1×1	05W=5W	L=Latching	25=250um bare	05=0.5m	0=None
		1X2	10W=10W		fiber
			20W=20W
	1550=1550nm			N=Non-Latching	90=900um loose	10=1.0m	1=FC/UPC
					tube

	3155=1310/1550nm				20=2mm cable		2=FC/APC

							3=SC/APC
							4=SC/UPC
							6=LC/PC

Download

1×1, 1×2 High Power Optical Switch.pdf

Inquiry

- verification code

1×1, 1×2 High Power Optical Switch

verification code

verification code