Home > Product > Optical Switch > Mechanical Optical Switch
1x2 Optical Switch
1x2 Optical Switch
1x2 Optical Switch
1x2 Optical Switch
1x2 Optical Switch
1x2 Optical Switch

1x2 Optical Switch

The 1x2 Opto-Mechanical Bi-directional Fiber Optic Switch LC/APC connector with Low insertion loss
  •  1x2 Opto-Mechanical Optical Switches


    GEZHI 1x2 Mechanical Optical Switch connects optical channels by redirecting an incoming optical signal into a selected output fiber. 


    GEZHI 1x2 Mechanical Optical Switch support all wavelength at 1260nm~1650nm, it offers ultra-high reliability, low insertion loss, fast switching speed as well as bi-directional performance. The optical switches are widely used for Optical Network, Protection, Transmitter and Receiver Protection,Network Test System and Instrumentations.


    Features

    ♦         Low Insertion loss

    ♦         Wide Wavelength Range

    ♦         Low Crosstalk

    ♦         High Stability, High Reliability

    ♦         Epoxy-free on Optical Path

    ♦         Latching and Non-latching 


    Applications

    ♦            Channel Blocking

    ♦            Configurable Add/Drop

    ♦            System Monitoring

    ♦            Instrumentation



    Technical Paremeter

    Parameters


    GZ-FSW-1×2

    Wavelength Range

    nm

    850±40 / 1300±40

    1260~1650

    Operating Wavelength

    nm

    850/1300

    1310/1490/1550/1625/1650

    Insertion Loss

    dB

    Typ:0.8  Max:1.2

    Typ:0.5  Max:1.0

    Return Loss

    dB

    MM≥30     SM≥50

    Crosstalk

    dB

    MM≥35     SM≥55

    PDL

    dB

    ≤0.05

    WDL

    dB

    ≤0.25

    TDL

    dB

    ≤0.25

    Repeatability

    dB

    ≤±0.02

    Power Supply

    V

    3.0  or 5.0

    Lifetime 

    Time

    ≥107

    Switch Time

    ms

    ≤8

    Transmission Power

    mW

    ≤500

    Operating   Temperature

    -20~+80

    Storage Temperature

    -40~+85

    Weight

    g

    16

    Dimension

    mm

    (L)27×(W)12.0×(H)8.2

    Note: 1. Customization is available. 

              2. Specified without connector, and add an additional 0.2dB loss per connector.


    Pins

    Control Model

    Optical Path

    Electric Drive

    Status Sensor

    1×2


    1

    5

    6

    10

    2-3

    3-4

    7-8

    8-9

    Latching

    P1-P2

    --

    --

    GND

    V+

    Close

    Open

    Open

    Close

    P1-P3

    V+

    GND

    --

    --

    Open

    Close

    Close

    Open

    Non-latching

    P1-P2

    --

    --

    --

    --

    Close

    Open

    Open

    Close

    P1-P3

    V+

    --

    --

    GND

    Open

    Close

    Close

    Open


    Optical Route

    Status OneStatus Two

      

          

         

           


    Electric

    Specifications

    Voltage

    Current

    Resistance

    5V   Latching

    4.5~5.5

    ≥50mA

     125Ω

    5V   Non-latching

    4.5~5.5

    ≥40mA

    175Ω

    3V   Latching

    2.7~3.3

    ≥70mA

    50Ω

    3V   Non-latching

    2.7~3.3

    ≥50mA

    70Ω

     

    Ordering Information

    Mode

    Wavelength

    Voltage Type

    Control Model

    Fiber Type

    Fiber Diameter

    Fiber Length

    Connector

    S=SM

    M=MM

    85=850nm

    13=1310nm

    15=1550nm

    13/15=1310/1550nm

    X=Others

    3=3V

    5=5V

    L=Latching

    N=Non-   Latching

    5=50/125

    6=62.5/125

    9=9/125

    X=Others

    25=250um

    90=900um

    20=2.0mm

    30=3.0mm

    X=Others

    1=1m

    2=1.5m

    X=Others

    00=None

    FP=FC/PC

    FA=FC/APC

    SP=SC/PC

    SA=SC/APC

    STP=ST/PC

    STA=ST/APC

    LP=LC/PC

    LA=LP/APC

    X=Others

    • verification code