1xN MEMS Optical Switch Rackmount
GEZHI’s MEMS Optical Switch, MEMs Fiber Switches are based on integrated silicon MEMS technology and is available in multichannel 1x4, 1x8, 1x16, 1x24, 1x32, 1x64, 1x128 up to 1x256 and matrix MxN Mems optical switch 8x8, 16x16, 16x64, 64x64 channels. Inside the switch package both the CMOS/TTL compatible driver. The array of MEMS optical switches can be controlled individually and are bidirectional so they can be used in either a 1xN or Nx1 orientation.
GEZHI’ s MEMS 1xN optical switches offer excellent optical performance, high reliability over a very long lifetime. They have been tested and proven in the telecommunication, aerospace and other demanding applications.
SerialNet, High Reliability, High Stability
LCD display panel. Visual display, Convenient operation
Transparent transmission signal. High stability and reliability
Channel and time interval of automatic scanning can be set up
RS232 Control and RJ45 Ethernet Remote Management
Optical Network Remote Monitoring Cable Monitoring and Maintaining system
850/1310 for MM or 1260~1650 for SM or customized
850/1310, 1310/1550 or customized
Insertion Loss (Max)
MM ≥ 30, SM ≥ 45
MM ≥ 30, SM ≥ 45
≤8 (Adjacent Channel)
FC, SC, LC, ST, SMA or customized
RJ45 & RS232 or customized
Working Power Supply (Plug Tyep)
AC：220V (50/60Hz) or DC：36V~72V
Rack mount Dimensions
1U L483XW230XH44.5 (Up to 32 channel) customization is available.
2U L483XW230XH89 (Up to 128 channel) customization is available.
3U L483XW230XH133.5 (Up to 256 channel) customization is available.
Ordering Information MEMS-1xN-X-XX-X-XX-XX-XX-XX
Panel to Explain
1x128 MEMS Fiber Optical Switches Rackmount Front Panel
Power: Master switch of power supply
RJ45:Communications network management interface ;
RS-232: Rs- serial interface ; RS232 serial communication interface;
LCD:Devices that display information directly;
▲: Key to move up; ▼: Key to move down; Enter: Key to determine;
Esc: Key to cancel;
1x128 MEMS Fiber Optical Switches Back Panel
AC:85~265V: Power cord interface;
ON/OFF: Master switch of power supply ;
When connected to the computer, the DB9 serial port crosswire of both ends should be applied. It means that #2,#3 cable of both ends should be connected crossed,#5 cable should be abutting jointed, and the rest could be left out.
When connected to the computer through switch, through lines should be applied.(The accurate order is 1-orange white,2-orange,3-green white,4-blue,5-blue white,6-green,7-brown white, 8-brown.)
When connected to the computer directly, cross wire should be applied.(One end is l-orange white,2-orange, 3-green white,4-blue,5-blue white,6-green,7-brown white,8-brown. Another end is 1-green)
Serial ports connection and control
(1) 、RS-232 pins definition and connection
① RS-232 pins definition: DB9 pins, #2-RXD, #3-TXD, #5-GND, other pins can not connect.
② RS-232 connect with equipment and PC: