Hot products

Related Products

1xN Optical Switch

Any 1xN configuration, Any fiber type, Wide band working wavelength

1XN Optical Switches Modules(1X4 1X8 1X12 1X16 1X24 1X32 1X45 1X64 1X128 ) is a kind of functional component, with the ability of switching optical route.
The 1XN Opto-Mechanical Optical Switches consists of 1 input and N output fiber ports that selectively transmits, redirects,or blocks optical power in a fiber optic transmission line.
These all-optical switches are bi-directional and can be used in either the 1xN or Nx1 direction.Fiber optical switches is designed for use in optical fiber communication networks and measurement instruments.

Specification

1xN Multi Channel Optical Switch

1xN Multi Channel optical switch is a kind of light path control equipment,can realize multi-channel fiber optic light path switching,In optical fiber transmission system, it is used for multi-channel fiber monitoring, multi light source/ detector selection, and optical fiber path protection etc. Besides, it is also used in optical fiber test system for optical fiber and its component test, outdoor cable test and multi-port optical sensors monitoring system.

GEZHI Photonics produce full range of optical switch with customized specifications:

1x4 , 1x8 , 1x12 , 1x16 , 1x24 , 1x32 , 1x64 .....1x128 multi channel Fiber Optical Switches

Technical Index

Parameter	Unit	1x4	1x8	1x12	1x16	1x24	1x32	1x64	1x128
Wavelength Range	nm	1260~1650
Testing Wavelength	nm	1310/1550
Insertion Loss (Typical)	dB	0.5	0.5	0.5	0.5	0.5	0.5	0.5	1.0
Insertion Loss (Max)	dB	≤0.8	≤0.8	≤1.0	≤1.0	≤1.0	≤1.0	≤1.0	≤1.2
Return Loss	dB	SM ≥ 50
Crosstalk	dB	≤-70
PDL	dB	≤0.05
WDL	dB	≤0.20
TDL	dB	≤0.20
Repeatability	dB	≤0.02
Lifetime	times	>107
Switching Time	ms	≤10 (Adjacent Channel)
Optical Power	mW	≤500
Control Mode	/	TTL or Customized
Operating Temperature	℃	-10~+55
Storage Temperature	℃	-40~+85
Module type Dimensions	mm	135x64x32				135x60x37		184x78x66	184x156x66

Ordering Information OSW-XxX-X-XX-X-XX-XX-XX-XX

OSW

Mode

Wavelength

Package

Fiber Type

Fiber Diameter

Fiber Length

Connector

1x4

1x8

1x16

1x32

1x64

1x128

S=Specity

S=SM

M=MM

85=850nm

13=1310nm

15=1550nm

85/13=850/1300

13/15=1310/1550nm

S=Specify

B=Metal Box

S=Specify

M5=50/125

M6=62.5/125

S9=9/125

S=Specify

25=250um

09=900um

S=Specify

05=0.5m

10=1.0m

S=Specify

00=None

FP=FC/UPC

FA=FC/APC

SP=SC/UPC

SA=SC/APC

LP=LC/UPC

LA=LC/APC

S=Specify

PIN Configurations

DB-9 male connector (1xN≤16) Optical Switch

DB-9 male connector
Pin No.	I / O	Signal	Description
1	Input	D0	D0~ D3 is channel selection Bit0~Bit3,D0 is low, D3 is high
2	Input	D1
3	Input	D2
4	Input	D3
5	Input	RESET	TTL, Low level reset to channel 0. High level means channel selection bits are effective.
6	Out	READY	TTL, Ready (High=Not ready, Low=Ready)
7	Out	ERROR	TTL, Error OR Failure , (High=Error, Low=No error)
8	Power	GND	Ground
9	Power	VCC	5.0±5% VDC Power Supply (max 500mA)

DB-15 male connector (1xN≤128) Optical Switch

DB-15 male connector
Pin No.	I / O	Signal	Description
2	Input	D0	D0~ D5is channel selection Bit0~Bit4,D0 is low, D4 is high
3	Input	D1
4	Input	D2
5	Input	D3
6	Input	D4
10	Input	D5
11	Input	RESET	TTL, Low level reset to channel 0. High level means channel selection bits are effective.
7	Out	READY	TTL, Ready (High=Not ready, Low=Ready)
8	Out	ERROR	TTL, Error OR Failure , (High=Error, Low=No error)
1,9	Power	GND	Ground
12	Power	VCC1	5.0V±5% VDC motor power (max 950mA)
15	Power	VCC2	5.0V±5% VDC Drive circuit power(50mA)
13,14		NC	NC