MxN MEMS Optical Switch Matrix Rackmount
GEZHI’s MEMS matrix Optical Switch, MEMs Fiber Switches matrix are based on integrated silicon MEMS technology and is available in multichannel 4x4, 8x8, 16x16, 24x24, 32x32, 64x64 up to 256x256 matrix MxN Mems optical switch. Inside the switch package both the CMOS/TTL compatible driver. The array of MEMS optical switches can be controlled individually and are bidirectional so they can be used in either a MxN or NxM orientation.
GEZHI’ s MEMS MxN optical switches offer excellent optical performance, high reliability over a very long lifetime. They have been tested and proven in the telecommunication, aerospace and other demanding applications.
SerialNet, High Reliability, High Stability
Channel and time interval of automatic scanning can be set up
RS232 Control and RJ45 Ethernet Remote Management
LCD display panel. Visual display, Convenient operation
Transparent transmission signal. High stability and reliability
1260~1650 for SM, 850/1310 for MM
SM ≥ 45, MM ≥ 30
SM ≥ 50, MM ≥ 30
≥ 10 billion
FC, SC, LC, ST, SMA or customized
RJ45 & RS232 or customized
Working Power Supply (Plug type)
AC：220V (50/60Hz) or DC：36V~72V
-10 ~ +60
-40 ~ +85
5 ~ 95
1U L483XW230XH44.5 (Up to 16 channel) customization is available.
2U L483XW230XH89 (Up to 32 channel) customization is available.
Ordering Information MEMS-MxN-X-XX-X-XX-XX-XX-XX
Panel to Explain
32x32 Optical Switch 19”2U Rack mount
Power: Master switch of power supply
RJ45:Communications network management interface ;
RS-232: Rs- serial interface ; RS232 serial communication interface;
LCD:Devices that display information directly;
▲: Key to move up; ▼: Key to move down; Enter: Key to determine;
Esc: Key to cancel;
Input 1~32; Output 1~32:Fiber interface;
AC:85~265V: Power cord interface;
ON/OFF: Master switch of power supply ;
When connected to the computer, the DB9 serial port crosswire of both ends should be applied. It means that #2,#3 cable of both ends should be connected crossed,#5 cable should be abutting jointed, and the rest could be left out.
When connected to the computer through switch, through lines should be applied.(The accurate order is 1-orange white,2-orange,3-green white,4-blue,5-blue white,6-green,7-brown white, 8-brown.)
When connected to the computer directly, cross wire should be applied.(One end is l-orange white,2-orange, 3-green white,4-blue,5-blue white,6-green,7-brown white,8-brown. Another end is 1-green)
Serial ports connection and control
(1) 、RS-232 pins definition and connection
① RS-232 pins definition: DB9 pins, #2-RXD, #3-TXD, #5-GND, other pins can not connect.
② RS-232 connect with equipment and PC: