1x128 Optical Switch

This 1x128 Optical switches Rackmount is composed of one input and 128 output optical fiber ports, which can selectively transmit, redirect or block the optical power in the optical fiber transmission line. These optical switches are bidirectional and can be used in 1x128 or 128x1 directions. Optical fiber switches are designed for optical fiber communication networks and measuring instruments.

The front panel bulkheads can be fit with typical FC/APC, FC/UPC, SC/APC, SC/UPC, LC/APC, LC/UPC, ST/APC, ST/UPC, MPO connector types etc. Normally this 2RU 19” rackmount can install 1x24 , 1x32 , 1x48 , 1x64 or customized Optical Switches.

Technical Index

Ordering Information   OSW-XxX-X-XX-X-XX-XX-XX-XX

Panel to Explain

1x128 Fiber Optical Switch Rackmount Front Panel

Power:  Master switch of power supply 

RJ45:Communications network management interface ;

RS-232: Rs- serial interface ; RS232 serial communication interface;

LCD:Devices that display information directly;

▲: Key to move up; ▼: Key to move  down; Enter: Key to determine;

     Esc: Key to cancel;

com,1~128:Fiber interface;

1x128 Fiber Optical Switch Rackmount Back Panel

AC:85~265V: Power cord interface;

• ON/OFF: Master switch of power supply ;

• Default Setting

• address：01

• RS-232：Baud rate:9600;  Data bits:8 bit;  Stop bit: 1 bit;   Parity bit:NONE;

• RJ45: IP：192.168.1.100 ;   PORT：5000;  TCP/IP:TCP Server and UDP

  （Fixed port：18888）

  Communication Protocol:

• “_”:A underline;

1x128 Fiber Optical Switch Rackmount Optical Route

• 
  

• Communication protocol all in uppercase characters;

• The device executes an instruction each time;

• "<" As the start instruction; ">" As an end instruction;