2x2 Full Opto-Mechanical Optical Switches
The 2x2F Bi-directional Fiber Optic Switch connects optical channels by redirecting 2 incoming optical signals into 2 output fibers. This is achieved using a opto-mechanical configuration and activated via an electrical control signal. The switch has integrated electrical position sensors.Based on thin film filter technology that provides a robust method of altering the light patch, this series of products has a drastically simplified platform configuration offering high reliability and low production cost. This novel design significantly reduces moving part position sensitivity, offering unprecedented high stability as well as an unmatched low cost.
Features l Low Insertion Loss l Low Crosstalk l High Stability, High Reliability l Epoxy-free on Optical Path | Application l MAN l R&D in Laboratory l System Monitoring l Configurable OADM |
Parameters
| Unit | GZ-2×2F | |
Wavelength Range | nm | 850±40 / 1300±40 | 1260~1650 |
Operating Wavelength | nm | 850 / 1300 | 1310/1550 |
Insertion Loss | dB | Typ:1.0 Max:1.2 | Typ:0.8 Max:1.0 |
Return Loss | dB | MM≥30 SM≥50 | |
Crosstalk | dB | MM≥35 SM≥55 | |
PDL | dB | ≤0.05 | |
WDL | dB | ≤0.25 | |
TDL | dB | ≤0.25 | |
Repeatability | dB | ≤±0.02 | |
Power supply | v | 3.0 or 5.0 | |
Lifetime | Time | ≥107 | |
Switch Time | ms | ≤8 | |
Transmission Power | mW | ≤500 | |
OperatingTemperature | ℃ | -20~+70 | |
Storage Temperature | ℃ | -40~+85 | |
Weight | g | 16 | |
Dimension | mm | (L)27.0×(W)12.0×(H)8.0 |
Type | Optical Route | Electric Drive | Status Sensor | ||||||
2×2F | channel | Pin 1 | Pin 5 | Pin 6 | Pin 10 | Pin 2-3 | Pin 3-4 | Pin 7-8 | Pin 8-9 |
Latching
| P1-P4、P2-P3 | -- | -- | GND | V+ | Close | Open | Open | Close |
P1-P3、P2-P4 | V+ | GND | -- | -- | Open | Close | Close | Open | |
Non-latching
| P1-P4、P2-P3 | -- | -- | -- | -- | Close | Open | Open | Close |
P1-P3、P2-P4 | V+ | -- | -- | GND | Open | Close | Close | Open |
Specification | Voltage | Current | Resistance |
5V Latching | 4.5~5.5V | 36~44mA | 125Ω |
5V Non-Latching | 4.5~5.5V | 26~32mA | 175Ω |
3V Latching | 2.7~3.3V | 54~66mA | 50Ω |
3V Non-Latching | 2.7~3.3V | 39~47mA | 70Ω |
GZ | Mode | Wavelength | Voltage Type | Control Model | Fiber Type | Fiber Diameter | Fiber Length | Connector |
2x2F | S=SM M=MM | 85=850nm 13=1310nm 15=1550nm 13/15=1310/1550nm S=Specify | 3=3V 5=5V | L=Latching N=Non- Latching | 5=50/125 6=62.5/125 9=9/125 S=Specify | 25=250um 90=900um 20=2.0mm S=Specify | 05=0.5m 10=1.0m S=Specify | 00=None FP=FC/PC FA=FC/APC SP=SC/PC SA=SC/APC LP=LC/PC LA=LC/APC S=Specify |