D1x2 Optical Switch

Dual 1x2 Opto-Mechanical Optical Switches

( 2x4 Fiberoptic Switch ）

Description

The D1x2 Opto-Mechanical Bi-directional Fiber Optic Switch connects optical channels by redirecting 2 incoming optical signals into 4 output fibers. This is achieved using a opto-mechanical configuration and activated via an electrical control signal. The switch has integrated electrical position sensors.Based on thin film filter technology that provides a robust method of altering the light patch, this series of products has a drastically simplified platform configuration offering high reliability and low production cost. This novel design significantly reduces moving part position sensitivity, offering unprecedented high stability as well as an unmatched low cost.

Features

Low Insertion LossWide Wavelength RangeLow CrosstalkHigh Stability, High ReliabilityEpoxy-free on Optical PathLatching and Non-latching

Applications

Metropolitan Area NetworkR&D in LaboratorySystem MonitorConfigurable OADMComponent testing

Technical Paremeter

Parameters		GZ-FSW-D1x2
Wavelength Range	nm	670～980	1260～1650
Testing Wavelength	nm	850±40/1300±40	1310/1550
Insertion Loss	dB	Typ:1.0 Max:1.5	Typ:1.0 Max:1.5
Return Loss	dB	MM≥30 SM≥50
Crosstalk	dB	MM≥35 SM≥55
PDL	dB	≤0.05
WDL	dB	≤0.25
TDL	dB	≤0.25
Repeatability	dB	≤±0.02
Power supply	v	3.0 or 5.0
Lifetime	time	≥10⁷
Switch Time	ms	≤8
Transmission Power	mw	≤500
Operation Temperature	℃	-20～+70
Storage Temperature	℃	-40～+85
Weight	g	16
Dimension	mm	(L)27×(W)12×(H)8.2 (±0.2mm) Customization is available

Pins

Control Model	Optical Path		Electric Drive				Status Sensor
D1×2	Light Pin		1	5	6	10	2-3	3-4	7-8	8-9
Latching	P1-P2	P1’-P2’	--	--	GND	V+	Close	Open	Open	Close
Latching	P1-P3	P1’-P3’	V+	GND	--	--	Open	Close	Close	Open
Non-latching	P1-P2	P1’-P2’	--	--	--	--	Close	Open	Open	Close
Non-latching	P1-P3	P1’-P3’	V+	--	--	GND	Open	Close	Close	Open

Optical Route

Fs D1*2 Optical Switch 5.jpg

Electric

Specifications	Voltage	Current	Resistance
5V Latching	4.5~5.5	36~44mA	125Ω
5V Non-latching	4.5~5.5	26~32mA	175Ω
3V Latching	2.7~3.3	54~66mA	50Ω
3V Non-latching	2.7~3.3	39~47mA	70Ω

Mechanical Dimensions (Unit: mm)

图片1.png

Ordering Information

X

XX

X

XX

X

XX

Mode

Wavelength

Voltage Type

Control Model

Fiber Type

Fiber Diameter

Fiber Length

Connector

S=SM

M=MM

85=850nm

13/15=1310/1550nm

X=Others

3=3V

5=5V

L=Latching

N=Non- Latching

5=50/125

6=62.5/125

9=9/125

X=Others

25=250um

90=900um

20=2.0mm

30=3.0mm

X=Others

1=1m

2=1.5m

X=Others

0=None

1=FC/PC

2=FC/APC

3=SC/PC

4=SC/APC

5=ST/PC

6=ST/APC

7=LC/PC

8=LC/APC

X=Others

D1x2 Optical Switch.pdf

- verification code

D1x2 Optical Switch

verification code

verification code